Product ID:2213 FRANKLIN TITEBOND WOOD GLUE
MSDS Date:01/01/1991
FSC:8040
NIIN:00F052495
MSDS Number: CDBSJ

FRANKLIN INTL INC

2020 BRUCK ST
COLUMBUS, OH 43207-2329
US

Emergency Phone: 614-443-0241AM/614-445-1411PM

Info Phone: 800-347-4583/614-443-0241

Cage: FO903

FRANKLIN INTL INC

COLUMBUS, OH 43207-2329 US

Telephone: 800-347-4583/614-443-0241

Cage: FO903

LESS WATER = 10.7 G/L MAXIMUM

RTECS: 9999999VO

VINYL ACETATE

CAS: 108-05-4

RTECS: AK0875000

Fraction By Weight: <0.4%

OSHA PEL 10 PPM

ACGIH TLV: 10 PPM

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS

Routes of Entry: Inhalation:NO Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:SKIN/EYES: IRRITATION.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:DIZZINESS, RASH, IRRITATION.

First Aid:INGESTION: DON'T INDUCE VOMITING. INHALATION: REMOVE TO FRESH
AIR. EYES: RINSE W/RUNNING WATER FOR 15 MINS. SKIN: WASH W/SOAP &
WATER. OBTAIN MEDICAL ATTENTION IN ALL CASES.

Flash Point:NONE
Extinguishing Media:WATER
Fire Fighting Procedures:WEAR MESA/NIOSH APPROVED SCBA.

Spill Release Procedures:IF PRODUCT HAS DRIED, SCRAPE UP & PLACE IN
APPROVED CONTAINER FOR DISPOSAL.

Handling and Storage Precautions:KEEP FROM FREEZING.
Other Precautions:KEEP OUT OF REACH OF CHILDREN.

Respiratory Protection:WEAR SUITABLE NIOSH/MSHA APPROVED RESPIRATOR
WHERE AIRBORNE LIMITS ARE EXCEEDED, 10 PPM FOR VINYL ACETATE
MONOMER.
Ventilation:LOCAL EXHAUST: AT POINT WHERE PRODUCT IS DRIED/STANDARD
PLANT.
Protective Gloves:IMPERVIOUS
Eye Protection:SPLASHPROOF SAFETY GOGGLES
Supplemental Safety and Health

Boiling Pt:B.P. Text:212F
Vapor Density:<1
Spec Gravity:1.09
pH:4.5
Evaporation Rate & Reference:(WATER = 1): 1
Solubility in Water:MISCIBLE
Appearance and Odor:LIGHT YELLOW OPAQUE LIQUID W/FAINT CHARACTERISTIC
ODOR
Percent Volatiles by Volume:54/WT

Stability Indicator/Materials to Avoid:YES
STRONG BASES & STRONG ACIDS.
Stability Condition to Avoid:FREEZING.
Hazardous Decomposition Products:WHEN BURNED: OXIDES OF CARBON &
MONOMER.
Conditions to Avoid Polymerization:MULTIPLE CYCLES OF FREEZING &
THAWING.

Waste Disposal Methods:DISPOSE OF IAW/FEDERAL, STATE & LOCAL
REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.